1. Regular Maintenance & Cleaning
Clean the Cooler - Remove dust and oil buildup from cooling surfaces.
Replace Lubricant Regularly - Follow the manufacturer's recommended oil change intervals.
Check and Clean Filters - Ensure air and oil filters are clear of debris.
2. Fix Cooling System lssues
Unblock Coolers - Use compressed air or solvent to clean the heat exchanger.
Repair Cooling Fans - Replace broken blades, motors, or belts.
Ensure Proper Water Cooling - Check flow rate, water quality, and system integrity.
3. Address Lubrication lssues
Maintain Correct Oil Levels - Regularly inspect and top-up lubricating oil.
Use Manufacturer-Approved Oil - Ensure oil meets viscosity and thermal stability requirements.
4. Reduce Equipment Overload
Replace Blocked Air Filters - Ensure sufficient air intake.
Monitor Exhaust Pressure - Prevent excessive back pressure buildup.
Avoid Continuous Overuse - Implement cool-down periods.
5. Optimize Environmental Conditions
lmprove Ventilation - Ensure adequate air circulation around the compressor.
Control Room Temperature - Use air conditioning or cooling fans in hot environments.
6. Upgrade Control Systems
Replace Faulty Sensors - Ensure accurate temperature monitoring.
Repair Temperature Valves - Prevent oil circulation failures.
Optimize PLC Settings - Fine-tune control logic for better efficiency.
Your message must be between 20-3,000 characters!
